Coating & Self Smoothing Systems with no anti-slip, Resin Terrazzo Systems

Make sure all soil, debris and litter is removed from floor before scrubbing. This can either be done by manually sweeping, dust mopping, or by using a power sweeper. This will ensure optimal solution recovery by the squeegee assembly of the scrubber drier and eliminate streaks. Use cleaning pads for smooth floor surfaces. Install the pad drivers on to the automatic scrubber and select white or red pads for daily light scrubbing applications. For less regular cleaning green pads can be used, but black pads should be avoided, as they will cause undue wear to the floor. Fill the scrubber with cool, clear water and cleaning chemical. For Tennant FaST Machines do not add chemical but instead install the FaST-Pak cartridge. For Tennant ECH2O machines only water is required. Follow the instructions for your particular machine, as supplied by the manufacturer, for cleaning the floor.

First Solution recommend Tennant machines and can arrange demonstrations and supply machines at competitive rates via an approved distributor.

All Anti-slip Systems (Coatings with anti-slip, polyurethane and epoxy screed systems)

Make sure all soil, debris and litter is removed from the floor before scrubbing. This can either be done by manually sweeping, or by using a power sweeper. This will ensure optimal solution recovery by the squeegee assembly and eliminate streaks. Use brushes for textured floor surfaces. Select the correct brushes and install these on the automatic scrubber. Carborundum brushes should not be used, as they will cause undue wear to the floor. Fill the scrubber with cool, clear water and cleaning chemical. For Tennant FaST Machines do not add chemical but instead install the FaST-Pak cartridge. For Tennant ECH2O machines only water is required. Follow the instructions for your particular machine, as supplied by the manufacturer, for cleaning the floor. First Solution recommend Tennant machines and can arrange demonstrations and supply machines at competitive rates via an approved distributor.

Additional Information for Food & Pharmaceutical Environments

Follow instructions as above but ensure that any chemicals used do not have any fragrance added.

Health and Safety Requirements.

All products to be used in accordance with the manufacturer's recommendations. This information can be found on the health and safety data sheets that are supplied with the products.

Note: Smooth finishes can be sealed if required using floor maintainers. It is not recommended to seal anti-slip finishes. For heavily soiled floors a double-scrubbing action can be used, i.e. scrub without pick up on first pass, leave for a few minutes and then go over area again using the scrubber in the normal manner.

Should you require further information or assistance with regard to any cleaning issue please contact us.

First Solution Online

10 Bailey Lane, Wilton, Salisbury, Wiltshire, SP2 0FS

Tel: 01380 831299 Email: tech@firstsolutiononline.co.uk Web: www.firstsolutiononline.co.uk