Resin Coatings & Self Smoothing Systems with no anti-slip and Resin Terrazzo Systems

Manually sweep or dust mop floor area to ensure all soil, debris and litter is removed before wet mopping. This will ensure the floor is easier to clean and help to eliminate streaks. Use cool, clear water and add a suitable cleaning chemical at the manufacturer's recommended dilution rate. Always use a clean mop and bucket. Colour coded mopping systems are recommended to avoid cross contamination between areas. Use a figure of eight motion with the mop and ensure that all areas are overlapped to avoid missing any areas. Rinse mop and change water regularly.

All Anti-slip Systems (Coatings with anti-slip, polyurethane and epoxy screed systems)

Sweep floor to ensure all soil, debris and litter is removed from floor before scrubbing. This will make the floor easier to clean and help to eliminate streaks. Use cool, clear water and add a suitable cleaning chemical at the manufacturer's recommended dilution rate. Always use a clean mop and bucket. Colour coded mopping systems are recommended to avoid cross contamination between areas. Use a figure of eight motion with the mop and ensure that all areas are overlapped to avoid missing any areas. Rinse mop and change water regularly. Note: For more aggressive anti-slip floors we would generally recommend using a scrubber drier. Please refer to our advice on cleaing with scrubber driers.

Additional Information for Food & Pharmaceutical Environments

Follow instructions as above but ensure that any chemicals used do not have any fragrance added.

Health and Safety Requirements.

All products to be used in accordance with the manufacturer's recommendations. This information can be found on the health and safety data sheets that are supplied with the products.

Note: Smooth finishes can be sealed if required using floor maintainers. It is not recommended to seal anti-slip finishes.

Should you require further information or assistance with regard to any cleaning issue please contact us.

First Solution Online

10 Bailey Lane, Wilton, Salisbury, Wiltshire, SP2 0FS

Tel: 01380 831299 Email: tech@firstsolutiononline.co.uk Web: www.firstsolutiononline.co.uk